CABLE JOINING & ACCESSORIES

• A SERIES:
A2F100
• E SERIES:
E1FX/M, E1FX/MF, E1FW/M, E1FW/MF
• PX SERIES: 
PXSS2KHCREX, PXSS2K/M, PXSS2K/MF, PX2KX/M, PX2KX/MF, PX2KW/M, PX2KW/MF

Underground (Group I) locations, surface mining (Group II) and general industrial scenarios.

• CMP industrial cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• Unique Independent Inner Sealing 
• Secure Armour Termination
• Outer Seal
• Proven Internally Enclosed Deluge Seal
• Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

-60°C to +130°C (standard), -60°C to +85°C (barrier glands)

Metric M20 to M130, NPT 1/2" to 5"