CABLE MANAGEMENT SYSTEMS

TK

It can be used in almost any location including homes, hotels and hospitals.

• Standard Cable Trunking is machine formed, with inturned strengthening flanges and supplied in 3 metre lengths and stocked in all our depots. (other lengths available on request).
• The lid incorporates a quick action metal locking device operated by a slotted stud. The slot indicates the position of the locking bar. (Note: lid is secured using turnbuckle type fastener)
• Each length of Standard Trunking is supplied complete with lid, Coupling, Screws and Nuts.
• Bends, Elbows, Tees and Intersection Boxes are complete with integral couplings.
• Special fittings such as OffSets, Risers, Unequal Tees and Bends can be made to order.
• All dimensions relate to the inside measurements
• STANDARDS: 
BS EN 50085-1:2005 for Cable trunking & Ducting systems
BS EN 60529:1992 for Weatherproof trunking
BS EN 10346:2009 for Pre-Galvanised Steel
BS EN 10088-2:2005 for Stainless Steel
BS EN ISO 1461:2009 for Galvanised After
BS EN 10130:2006 for Galvanised After
• Protects cables from damage and to hide unsightly cables from view. 

BSI, CE

Unitrunk standard trunking is manufactured from pre-galvanised steel and is supplied in 3m lengths. 
50x50, 75x50, 75x75, 100x50, 100x75, 100x100, 150x50, 150x75, 150x100, 150x150

TK X 2, TK X 3

It can be used in almost any location including homes, hotels and hospitals.

• Standard Cable Trunking is machine formed, with inturned strengthening flanges and supplied in 3 metre lengths and stocked in all our depots. (other lengths available on request).
• The lid incorporates a quick action metal locking device operated by a slotted stud. The slot indicates the position of the locking bar. (Note: lid is secured using turnbuckle type fastener).
• Each length of Standard Trunking is supplied complete with lid, Coupling, Screws and Nuts.
• Dividing fillets are normally supplied spot welded in position, but can also be supplied loose.
• Bends, Elbows, Tees and Intersection Boxes are complete with integral couplings.
Special fittings such as OffSets, Risers, Unequal Tees and Bends can be made to order.
• All dimensions relate to the inside measurements
STANDARDS:
BS EN 50085-1:2005 for Cable trunking & Ducting systems
BS EN 60529:1992 for Weatherproof trunking
BS EN 10346:2009 for Pre-Galvanised Steel
BS EN 10088-2:2005 for Stainless Steel
BS EN ISO 1461:2009 for Galvanised After
BS EN 10130:2006 for Galvanised After
• Protects cables from damage and to hide unsightly cables from view. 

BSI, CE

Unitrunk standard trunking is manufactured from pre-galvanised steel and is supplied in 3m lengths. 
50x50, 75x50, 75x75, 100x50, 100x75, 100x100, 150x50, 150x75, 150x100, 150x150

LT

It can be used in almost any location including homes, hotels and hospitals.

• Unitrunk Lighting Trunking is manufactured from galvanised sheet steel to BS EN 10346:2009, giving maximum protection from corrosion and excellent earth continuity.
• Standard Cable Trunking fittings can be used with Lighting Trunking, which enables the two types to be easily interconnected thus simplifying installation and wiring.

CE, BSI

Supplied in 3m, 4m, 4.5m, 6m lengths.
50x50