Products

INDUSTRIAL / GENERAL PURPOSE CABLE GLANDS

Type

• TRUESEAL:
TSP, TSZ, TSX, TSM, TSPV0
• A SERIES:
A2, A2RC, A2 SOLO, A2HT, A2-FF
• SS SERIES:
SS2KGP, SS2KGPPB
• B SERIES: 
BW, BWL, BW SOLO
• C SERIES: 
C2KGP, CW, CX, CXT, CW SOLO, CWHT, CXHT
• E SERIES:
E1U, E2U, E1W, E2W, E1X, E2X, E1W SOLO, E1UHT
• CIEL SERIES:
BWL CIEL, CW CIEL, E1W CIEL, E2W CIEL
• ZEN SERIES: 
B324, B348, B367, B368, B327, B350, B323, B347

Use

Cable glands may be used on all types of electrical power, control, instrumentation, data and telecommunications cables. 

Features & Benefits


• Unique Independent Inner Sealing 
• Secure Armour Termination
• Outer Seal
• Proven Internally Enclosed Deluge Seal
• Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

Operating Temprature

-60°C to +130°C (standard)

Type tested and certified by

• CMP industrial cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• Our industrial armoured and unarmoured cable glands are manufactured to the highest quality under a third-party approved quality management system conforming to ISO 9001:2015.

Sizes

Metric M20 to M130, NPT 1/2" to 5"

EXPLOSIVE ATMOSPHERE CABLE GLANDS

Type

• TRUESEAL: 
TSMeX Ex, TSPe Ex
• TRITON SERIES:
T3CDS, T3CDSPB, TE1FU, TE1FUPB, T3CDSHT
• A SERIES:
A2F100, A2e100, RA2e100, A2F, A2E, RA2E, A2FRC, A2FFC, A2FHT, A2F-FF
• SS SERIES:
SS2K, SS2KPB, SS2KTA, SS2KHT
• C SERIES:
CXe, CWe, C2K, C2KHT
• E SERIES:
E1FU, E2FU, E1FX, E2FX, E1FW, E2FW
• TMC/2 Series:
 TMC, TMC2
• TMCX/2 Series:
TMCX, TMC2X, TMC2X
• PX REX Series:
PX2KREX, PX2KWREX, PX2KXREX, PX2KPBREX, PXSS2KREX, PXSS2KHCREX, PXRCREX
• PX Series:
PX2K, PX2KX, PX2KW, PX2KPB, PXSS2K, PXRC

Use

For termination of cables in explosive atmospheres

Features & Benefits


• Unique Independent Inner Sealing 
• Secure Armour Termination
• Outer Seal
• Proven Internally Enclosed Deluge Seal
• Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

Operating Temprature

-60°C to +130°C (standard), -60°C to +85°C (barrier glands)

Type tested and certified by

• CMP industrial cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• CMP’s range of flameproof and explosion-proof cable glands has multiple-certification, allowing customers to select one gland to cover a multitude of situations including ATEX, IECEx, cCSAus and UL.

Sizes

Metric M20 to M130, NPT 1/2" to 5"

MINING GROUP CABLE GLANDS

Type

• A SERIES:
A2F100
• E SERIES:
E1FX/M, E1FX/MF, E1FW/M, E1FW/MF
• PX SERIES: 
PXSS2KHCREX, PXSS2K/M, PXSS2K/MF, PX2KX/M, PX2KX/MF, PX2KW/M, PX2KW/MF

Use

Underground (Group I) locations, surface mining (Group II) and general industrial scenarios.

Features & Benefits

• CMP industrial cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• Unique Independent Inner Sealing 
• Secure Armour Termination
• Outer Seal
• Proven Internally Enclosed Deluge Seal
• Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

Operating Temprature

-60°C to +130°C (standard), -60°C to +85°C (barrier glands)

Type tested and certified by

NA

Sizes

Metric M20 to M130, NPT 1/2" to 5"

AMERICAS HAZARDOUS LOCATION CABLE GLANDS

Type

• A SERIES:
A2F/US
• C SERIES: 
C2KX
• TMC/2 SERIES:
TMC, TMC2
• TMCX/2 SERIES:
TMCX, TMCX2
• TC SERIES:
CG, TC
• TRITON SERIES:
TDS(T3CDS-US)
• PX REX SERIES: 
PX2KWREX-US, PXSS2KREX-US,  PX2KREX-US, PX2KXREX-US
• PX SERIES:
PK2KW-US, PXSS2K-US, PX2K-US, PX2KX-US

Use

The following cable glands have been designed, engineered and manufactured for use in hazardous (classified) locations and ordinary locations under the NEC (National Electrical Code) and CEC (Canadian Electrical Code) installation standards.

Features & Benefits

• CMP cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• • Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

Operating Temprature

-60°C to +130°C (standard), -60°C to +85°C (barrier glands)

Type tested and certified by

Specifications and approvals ensure the provisions of a complete global solution, covering UL, ISO, ANSI, CSA and IEC standards and meeting the requirements of NEC, CEC and IEC installation codes.

Sizes

Metric M20 to M130, NPT 1/2" to 5"

THREAD CONVERSIONS & ACCESSORIES

Type

• 737, 787, 797, 777, 781, 747, 757, 767
• 780, PX780REX, 784, PX784, 789, PX789REX
• Locknuts, Serrated Washers, Earth Tags, Earthing/ Grounding Locknuts, Earthing/ Grounding Locknuts, Entry Thread Sealing Washers, Cable shrouds, Spanners

Use

When the cable gland fits the cable but the connecting thread differs, the best solution may be to use a thread conversion adaptor, especially when schedules are critical and time is of the essence.

Features & Benefits

• CMP accessories conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• The range is particularly suited to large-scale construction projects where a high volume of cables of varying types and sizes is used.

Operating Temprature

NA

Type tested and certified by

CMP industrial, marine and explosive atmosphere products in this range are offered with a host of internationally recognised bodies including ATEX, IECEx, cCSAus, UL and more.

Sizes

Each of these products is available in a combination of different thread forms and sizes including metric, PG, NPT, BSP etc.

CABLE CLEATS & ACCESSORIES

Type

• POLYMERIC:
Sabre, Falcon
• METALLIC:
Trefoil Intermediate Restraint, Helios, Reliance, Solace, Themis, Valiant, Zenith, Sapphire, Cyclone I, Cyclone II, Cyclone III, Cyclone Strap, Huron, Patriot, Sovereign, Conqueror
• ACCESSORIES:
Isolation / Seperation Pad, Wire Mesh Cable Tray / Basket Clips
 

Use

Cable cleats are available for a number of different applications such as rail, underground, oil and gas, mining and petrochemical.

Features & Benefits

• The range is tested in accordance with IEC 61914 to ensure that, regardless of the cable formation used on the installation, there is a suitable cable cleat.
• CMP cable cleats provide the necessary levels of resistance to electromechanical forces, where declared, and in addition achieve the following safety measures:
-Support cables and conductors.
-Reduce the mechanical load the cable may be exposed to under its own weight.
-Reduce the mechanical load the cable termination may be exposed to.

Operating Temprature

• POLYMERIC:
Sabre, Falcon: -40°C to +60°C
• METALLIC:
Valiant, Zenith: -60°C to +150°C
Solace, Themis, Helios: -60°C to +250°C
Sapphire, Huron, Reliance, Patriot, Sovereign, Conqueror, Trefoil Intermediate Restraint: -50°C to +60°C
Cyclone I, Cyclone II/III, Cyclone Strap: -50°C to +40°C
 

Type tested and certified by

ABS, BUREAU VERITAS, DNVGL, LLOYDS, GOST R, LONDON UNDERGROUND , RMRS

Sizes

• POLYMERIC:
Sabre: 10mm to 57mm, Falcon: 38mm to 135mm
• METALLIC:
Valiant, Solace: 10mm to 71mm, 
Zenith: 38mm to 151mm, 
Themis: 38mm to 97mm, 
Helios: 10mm to 65mm, 
Sapphire: 19mm to 150mm, 
Huron, Reliance: 19mm to 128mm, 
Trefoil Intermediate Restraint: 19mm to 270mm, 
Patriot, Sovereign: 17mm to 128mm, 
Cyclone I/II/III/Cyclone Strap: 24mm to 145mm, Conquerer: 23mm to 130mm

Subscription

Sign up for our newsletter to receive latest updates.