CABLE JOINING & ACCESSORIES

• A SERIES:
A2F/US
• C SERIES: 
C2KX
• TMC/2 SERIES:
TMC, TMC2
• TMCX/2 SERIES:
TMCX, TMCX2
• TC SERIES:
CG, TC
• TRITON SERIES:
TDS(T3CDS-US)
• PX REX SERIES: 
PX2KWREX-US, PXSS2KREX-US,  PX2KREX-US, PX2KXREX-US
• PX SERIES:
PK2KW-US, PXSS2K-US, PX2K-US, PX2KX-US

The following cable glands have been designed, engineered and manufactured for use in hazardous (classified) locations and ordinary locations under the NEC (National Electrical Code) and CEC (Canadian Electrical Code) installation standards.

• CMP cable glands conform to the latest international standards — including EN 62444, IEC 62444 and the more rigorous BS6121:Part 1:1989.
• • Environmental protection – by sealing on the outer cable sheath, excluding dust and moisture from the electrical or instrument enclosure.
• Earth continuity – in the case of armoured cables, when the cable gland has a metallic construction. In this case cable glands may be tested to ensure that they can withstand an appropriate peak short circuit fault current.
• Holding force – on the cable to ensure adequate levels of mechanical cable ‘pull out’ resistance.
• Additional sealing – on the part of the cable entering the enclosure, when a high degree of ingress protection is required.
• Additional environmental sealing – at the cable entry point, maintaining the ingress protection rating of the enclosure with the selection of applicable accessories dedicated to performing this function.

-60°C to +130°C (standard), -60°C to +85°C (barrier glands)

Specifications and approvals ensure the provisions of a complete global solution, covering UL, ISO, ANSI, CSA and IEC standards and meeting the requirements of NEC, CEC and IEC installation codes.

Metric M20 to M130, NPT 1/2" to 5"